国产69精品久久99不卡资源-亚洲国产成人综合自在线-久久精品国产综合亚洲av-在线观看亚洲精品国产另类

當前位置:首頁  >  技術文章  >  日本JIS Z8901試驗粉塵,日本JIS Z8901關東沙,日本JIS Z8901關東土全國

日本JIS Z8901試驗粉塵,日本JIS Z8901關東沙,日本JIS Z8901關東土全國

更新時間:2012-09-25      點擊次數:3554

 美國亞利桑那試驗粉塵#IEC 60312試驗粉塵#ISO 12103試驗粉塵 4006306773;;60496773;,王,韓國ITC沙塵試驗箱ISO 12103-1 A1 Ultrafine Test Dust;ISO 12103-1 A2 Fine Test Dust;ISO 12103-1 A3 Medium Test Dust ISO 12103-1;A4 Coarse Test Dust

5.8.1 Dust Tests.粉塵測試

 

Purpose: To determine if the enclosure provides sufficient protection from dust intrusion from

windblown sand and road dust to allow the DUTto continue to meet the performance requirements

specified in the CTS. The accumulation of dust on heat sink devices will adversely affect heat dissipation. Dust may also combine with humidity and salt to produce unintentional conductive paths. Dust accumulation will adversely affect electro-mechanical devices resulting in increased friction or complete blockage of motion.

目的:用來確定當有風沙和路面灰塵干擾時,附件能否提供充分的保護使得DUT繼續達到CTS中所指明的運行要求。

 

Procedure (Operating Type 1.2): Test according to ISO 20653 Protection against objects, water

and access. This test shall be conducted using ISO 12103-1, A2 Fine Grade Dust and should occur

for a period of 8 hours.

過程(操作方式1.2):測試根據ISO20653針對水等物體的防護。測試須使用ISO12103-1,A2優良等級,同時,粉塵需持續8個小時。

 

Criteria: Functional Status shall be class A.

標準:功能狀態須為A

 

The DUT shall experience no damage, loss of function, or degradation of performance. The DUT shall pass the Functional/Parametric Test at the end of test prior to cleaning.

DUT應避免受損,破壞功能,或降解其性能。DUT在清潔前須通過功能/參數測試。


 

0微米至尺寸的等級
名義尺寸范圍
(µm)
材料品種
0 –
5
Fe2O3 (Hematite,赤鐵礦)
Fe
3
O
4

(Magnetite,磁鐵礦)
0 – 10
Fe2O3 (Hematite,赤鐵礦)
Fe
3
O
4

(Magnetite,磁鐵礦)
可接受的尺寸范圍是指0微米至的尺寸產品中,至少包含尺寸的顆粒的體積百分為96%。
中等級別產品
名義尺寸范圍
(µm)
材料品種
5 – 10
Fe2O3 (Hematite,赤鐵礦)
Fe
3
O
4

(Magnetite,磁鐵礦)
中等級氧化鐵產品按體積百分比計算,至少包含80%上面的尺寸的顆粒。
0微米至尺寸的等級
名義尺寸范圍
(µm)
材料品種
0 –
5
Fe2O3 (Hematite,赤鐵礦)
Fe
3
O
4

(Magnetite,磁鐵礦)
0 – 10
Fe2O3 (Hematite,赤鐵礦)
Fe
3
O
4

(Magnetite,磁鐵礦)
可接受的尺寸范圍是指0微米至的尺寸產品中,至少包含尺寸的顆粒的體積百分為96%。
中等級別產品
名義尺寸范圍
(µm)
材料品種
5 – 10
Fe2O3 (Hematite,赤鐵礦)
Fe
3
O
4

(Magnetite,磁鐵礦)
中等級氧化鐵產品按體積百分比計算,至少包含80%上面的尺寸的顆粒。

 

美國亞利桑那試驗粉塵#IEC 60312試驗粉塵#ISO 12103試驗粉塵 4006306773;;60496773;,王,韓國ITC沙塵試驗箱

品牌:

 

美國PTI

 

型號:

 

ISO12103-1 A1 Ultra

 

 

 

ISO 12103-1 A1
Ultrafine Test Dust A1

PTI 是具備ISO
等級試驗粉塵及特殊定制粉塵分布的制造商和經銷商。具體請閱讀:“試驗粉塵的歷史”來了解PTI在生產ISO12103-1標準中規定的4個等級試驗粉塵的角色。專業的工程技術,良好的發展?fàn)顟B(tài),保密產權程序的實施,*的分析調查及每個階段材料處理的評估都讓PTI對其客戶無論從競爭者或增值服務都脫穎而出。

典型的化學成分分析
化學成分 重量百分比 化學成分 重量百分比
Si02 68 - 76 Ca0 2.0 - 5.0
Al203 10 - 15 Mg0 1.0 - 2.0
Fe203 2 - 5 Ti02 0.5 - 1.0
Na20 2 - 4 K20 2.0 - 5.0
 
*Loss on Ignition 2 – 5%

ISO
試驗粉塵顆粒分布(體積百分比小于)
尺寸(微米) ISO 12103-1, A1
超細試驗粉塵
1 1.0 – 3.0
2 9.0 – 13.0
3 21.0 – 27.0
4 36.0 – 44.0
5 56.0 – 64.0
7 83.0 – 88.0
10 97.0 – 100
20 100
40 --
80 --
120 --
 

PTI粉塵灰灰塵ACFTD灰塵ISO 12103-1 A2 Fine Test
Dust A2粉 ISO 12103-1 A4 Coarse Test Dust A4粉 ISO 12103-1 A3 Medium Test Dust
A3粉MTD粉塵 Arizona Test Dust Fractions 亞利桑那試驗粉塵MIL 810E4 Silica Sand & Dust
Iron Oxide 波特蘭水泥 Type IGlass Beads 玻璃珠 PV 樹脂(噴融樹脂) 汽車安全帶測試粉塵ECE R16, Section 7.6.3.2 (GB 14166, Section 5.6.3.2液SoftC-2A Quartzose Mineral Dust DMT emission test dust (IEC 60312
5.1.2.5) Test Dust Type 8® DMT test dust type 8 (IEC 60312 5.1.2.3)
Quartzose Mineral DMT carpet test dust (IEC 60312 5.1.2.2) DMT Dolomite Sand (IEC 60312 5.1.2.1)A2 ISO 細灰 A4粗灰
亞利桑那沙子亞利桑那試驗粉塵 美國ISO MTD粉塵A2測試粉A3中級試驗粉塵AC DUST A2 粉塵 ISO 試驗粉塵 亞力桑那A2粉塵
美國PTI碳黑粉塵 ISO 12103-2 M2鋁粉 A2 ISO 細灰 ISO 12103-2 M3鋁粉 ISO 12103-2 M4鋁粉ISO
12103-2 M5鋁粉JIS CLASS 2級粉塵 PTI 粉塵Nominal 0-5 Arizona Test Dust PTI 粉塵Nominal
10-20 Arizona Test Dust PTI 粗粉 PTI 粉塵Nominal 20-40 Arizona Test Dust
試驗用粉塵12103-1 A2類粗粉粗灰美國亞利桑那A1粉 FLY ASH 飛灰Portland Cement波特蘭水泥美國亞利桑那M5粉APPIE JIS
Z 8901 CLASS 1 試驗粉塵APPIE JIS試驗用粉體1 8種APPIE關東粉APPIE JIS test powders 1 class8
日本粉體工業技術協會APPIE APPIE JIS Z 8901 試驗用粉體1,CLASS 8 APPIE JIS Z 8901 CLASS
15粉塵COTTON LINTERS 棉花纖維鐵粉(赤)氧化鐵 Carbon Black炭黑Ashrae test dust with carbon
black 試験用粉體1の7種, 8種, 11種JIS粉塵是依據JIS(Japanese Industrial
Standard,即日本工業標準)生產的試驗粉塵,常被用于一些日系產品的檢測。本公司可為廣大國內用戶提供日本進口的下述檢測雜質,包括JIS Z
8901的試驗粉塵和玻璃珠產品;請在與我們的時候描述清楚您需要的是下面哪種產品Quartz sand Talc Fly ash KANTO
(Japanese) loam Carbon black Calcium- carbonate (heavy) Glass beads GBL type
Glass beads GBM type White fused alu mina JIS Z8901 1 種(硅砂) JIS Z8901 3 種(硅砂)JIS
Z8901 4 種(滑石粉)JIS Z8901 7 種(關東粉)JIS Z8901 8
種(關東粉)鐵粉0-5微米Fe3O4鐵粉(赤)0-5微米Fe2O3
鐵粉(赤)5-10微米Fe2O3 棉花纖維COTTON LINTERS

美國亞利桑那試驗粉塵#IEC 60312試驗粉塵#ISO 12103試驗粉塵 4006306773;;60496773;,王,韓國ITC沙塵試驗箱
我司代理的美國PTI試驗粉塵應用在包括濾清器行業,電子行業等;德國DMT試驗粉塵對于房屋通風系統過濾器應用比較廣泛;而日本JIS試驗粉塵的也應用在濾清器行業和電子行業;下表列出了來自美國PTI公司*的常用的濾清器行業檢測標準;

自從我司2007年七月取得美國PTI公司中國*代理權后。我們發現大部分客戶并非來自濾清器行業,如果您已購買過我司代理的各種試驗雜質,并愿意共享你們的標準,非常歡迎您來信,提供您使用的標準號,標準名稱,對應的試驗雜質以及簡單的注釋。我們將不斷地擴充下表;
共享是件很棒的事!

 

Filtration Standards,
&
Specifications
Contaminants
Required
Comments &
Information
ANSI B93.31: Multipass Method for
Evaluating the Filtration Performance of a Fine Hydraulic Fluid Power
Element
ISO 12103-1, A2 Fine Test Dust (AC Fine Test Dust per
standard is obsolete)
B93.31: Hydraulic Filter Multipass Method
is cancelled. ISO 16889 has replaced the ANSI B93.31
& NFPA T3.10.8.8 documents
ISO 4020: Road Vehicles - Fuel Filters
for Diesel Engines
ISO 12103-2, M1 and M2 Aluminum Oxide Test
Dusts
An Organic Contaminant is also required, see 4020
standard for details.
ISO 4548-4: Initial Particle Retention
Efficiency, Life & Cumulative Efficiency (gravimetric method)
ISO 12103-1,A2 Fine Test Dust ISO 12103-2, M2, M3, M4 and
M5 Aluminum Oxide Test Dust
Life & Cumulative Efficiency uses A2 Fine Test Dust
Initial Particle Retention uses M series of Aluminum Oxide Test
Dust
ISO 4548-12: Filtration Efficiency using
Particle Counting, & Contaminant Retention Capacity
ISO 12103-1, A3 Medium Test Dust SAE J 1858 Oil Filter Multipass Method is cancelled. ISO 4548-12 has been adopted by
SAE
ISO 4572: Hydraulic Fluid
Power-
Filters - Multipass Method
ISO 12103-1, A2 Fine Test Dust (AC Fine Test Dust per
std. is obsolete)
SAE J 726 Air Cleaner Test Code is cancelled. ISO 5011 has been adopted by SAE
ISO/TS 11155-1: Road Vehicles - Air
Filters for Passenger Compartments Part 1: Test for Particulate
Filtration
ISO 12103-1, A2 Fine Test Dust SAE J 1669-1: Cabin Particulate cancelled.
ISO/TS 11155-1 has been adopted by
SAE
ISO/TS 13353: Diesel Fuel & Petrol
Filters for Internal Combustion Engines - Initial Efficiency by Particle
Counting
ISO 12103-1, A3 Medium Test Dust ISO/TS 13353 is cancelled &
withdrawn. ISO 19438 has replaced 13353
ISO 16889: Hydraulic Fluid Power Filters
- Multipass Method for Evaluating Filtration Performance of a Filter
Element.
ISO 12103-1, A3 Medium Test Dust ISO 16889 has replaced 4572 Hydraulic Filter Multipass
Test Method
ISO 19438: Diesel Fuel & Petrol
Filters for Internal Combustion Engines - Filtration Efficiency using Particle
Counting & Contaminant Retention Capacity
ISO 12103-1, A3 Medium Test Dust ISO 19438 has replaced 13353 Fuel Filter Initial
Efficiency
ISO/CD19713: Inlet Air Cleaning
Equipment for Internal Combustion Engines & Compressors -Fractional
Efficiency Testing
ISO 12103-1, A2 Fine Test Dust and A4 Coarse Test
Dust
This Standard is under development by ISO/TC22/SC7/WG3
Air & Oil Filters
JIS D1608: Fuel Filter Test Method for
Automotive Gasoline Engines
JIS Z 8901, Class 8 (fine) Test Dust ISO 12103-1, A2 Fine Test Dust may be substituted if
listed in test report and/or with customer agreement
JIS D1611: Automotive Parts - Test
Methods of Lubricating Oil Filters
SOFTC-2A Gravimetric Test Method
JIS D1617: Automotive Parts - Fuel
Filters for Diesel Engines Test Methods
An Organic Contaminant is also required, see D1617
standard for detail. ISO 12103-2
Aluminum Oxide Test Dusts JIS Z 8901 Class 8
(fine) Test Dust
ISO 12103-1, A2 Fine Test Dust may be substituted for JIS
Z 8901 Class 8 Test Dust if listed in test report and/or with customer
agreement
NFPA T3.10.8.8: Hydraulic Fluid
Power-Filters - Multipass Method for Evaluating Filtration
Performance
ISO 12103-1, A2 Fine Test Dust (AC Fine Test Dust per
standard is obsolete)
T3.10.8.8 Hydraulic Filter Multipass Method is cancelled. ISO 16889 has replaced the NFPA & ANSI B93.31
documents
SAE J 726: Air Cleaner Test
Code
ISO 12103-1, A2 Fine Test Dust and A4 Coarse Test
Dust
SAE J 726 Air Cleaner Test Code is cancelled. ISO 5011 has been adopted by SAE
SAE HS- 806: Oil Filter Test Procedure
Section 6: Filter Capacity & Contaminant Removal Characteristics of
Full-Flow Oil Filters
ISO 12103-1, A2 Fine Test Dust SOFTC 2A Gravimetric Test Method for Overall Efficiency &
Capacity
SAE HS- 806: Oil Filter Test Procedure
Section 7: Single Pass Particle Retention Capability Test
Broad Range within 29-470 μm of glass beads Narrow Range
in 10 μm fractions of glass beads Natural ISO 12103-1, A4 Coarse Test Dust in
full range or fractions thereof
Gravimetric Test Method for Single Pass
Efficiency
SAE J 905: Fuel Filter Test
Methods
ISO 12103-1, A2 Fine Test Dust Gravimetric Test Method for Efficiency &
Capacity
SAE J 1669-1: Passenger Compartment Air
Filter Test Code - Particulate Filtration
ISO 12103-1, A2 Fine Test Dust SAE J 1669-1 is cancelled.
ISO 11155-1 has been adopted by
SAE
SAE J 1858: Full-Flow Lubricating Oil
Filters Multipass Method for Evaluating Filtration Performance
ISO 12103-1, A3 Medium Test Dust SAE J 1858 is cancelled.
ISO
4548-12 has been adopted by SAE
SAE J 1985: Fuel Filters - Initial
Single Pass Efficiency Test Method
ISO 12103-1, A2 Fine Test Dust Particle Counting Fuel Filter Test Method- Fractional
Efficiency

 

美國亞利桑那試驗粉塵#IEC 60312試驗粉塵#ISO 12103試驗粉塵 4006306773;;60496773;,王,韓國ITC沙塵試驗箱

 

Q2、PTI公司的ISO等級的試驗粉塵的密度(單位體積重量)大概是多少?

1、 ISO
12103-1 A1 Ultrafine – 500 kg/m3
2、 ISO 12103-1 A2 Fine – 900 kg/m3
3、
ISO 12103-1 A3 Medium – 1025 kg/m3
4、 ISO 12103-1 A4 Coarse – 1200
kg/m3
 

 

美國亞利桑那試驗粉塵#IEC 60312試驗粉塵#ISO 12103試驗粉塵 4006306773;;60496773;,王,韓國ITC沙塵試驗箱

 

Q3、請問 SAE Fine Test dust 是否等同于 ISO 12103-1 A2 Fine Test Dust? SAE
J726 試驗粉塵和 ISO 12103-1 A2 Fine試驗粉塵之間有何區別?


ISO 12103-1, A2
細試驗粉塵與1993年之前PTI公司生產的 SAE Fine Test Dust 是相同的。只是由于鑒于依據 ISO 12103-1
標準的測量儀器的升級,其報告的顆粒尺寸要略小一點點。 SAE J726 標準已在2002年作為并由 ISO 5011 取代,ISO 5011 使用滿足
ISO 12103-1 標準的試驗粉塵。關于這個問題的詳細信息,點擊此處訪問試驗粉塵的歷史。

美國亞利桑那試驗粉塵#IEC 60312試驗粉塵#ISO 12103試驗粉塵 4006306773;;60496773;,王,韓國ITC沙塵試驗箱

Q4、貴司提供的美國PTI粉塵在過濾行業中的應用表格很有幫助,能否對于德國DMT粉塵的應用也提供類似的表格呢?(2008-11)

Contaminants
Standards,
& Specifications
Comments &
Information

DMT test dust type 8 ®

(Simulated house hold dust)
IEC 60312 Ed. 4, 2007,
Chap.5.1.2.3
Composition is described in the standard
Mineral dust (dolomite sand) IEC 60312 Ed. 4, 2007,
Chap.5.1.2.1
Particle size composition -see standard
Carpet test dust IEC 60312 Ed. 4, 2007,
Chap.5.1.2.2
Particle size composition -see standard
Emission test dust IEC 60312 Ed. 4, 2007,
Chap.5.1.2.5
Particle size composition -see standard
Customized test dusts or mixture preparations
  to: dmt@jun-yu.com

美國亞利桑那試驗粉塵#IEC 60312試驗粉塵#ISO 12103試驗粉塵 4006306773;;60496773;,王,韓國ITC沙塵試驗箱

 
Q5、ASHRAE和ANSI是什么意思?

ASHRAE
American Society of Heating Refrigerating and Airconditioning
Engineers 的縮寫,意
思是美國采暖, 制冷與空調工程師學會;
ANSI
是 American National Standards Institute
的縮寫,意思是美國國家標準協會;
 

Q6、同樣尺寸塑料瓶裝的ISO 12103-1 A2 Fine試驗粉塵的重量為何比ISO 12103-1
A4輕約一公斤?按理說A2粉塵含有更多小顆粒,那應該重量更重才對?。繛楹螌嶋H情況正好相反?


ISO
12103-1 A2 Fine Test Dust

的確是含有更多的小顆粒,同樣容積的塑料瓶內A2的試驗粉塵顆粒數目也相對于ISO 12103-1 A4 Coarse Test
Dust
更多。

  但是,較大尺寸的粉塵顆粒本身的重量較之小顆粒要更重,雖然A4粉塵的數量不及A2多,但重量卻更重;另外,每個單獨的粉塵顆粒之間會有空氣存在,因此越多顆粒,也就意味著越多的空氣,這樣的后果就是較低的容重。比如一加侖罐子裝0-3微米亞利桑那道路試驗粉塵,其重量大概只有1.5公斤,而同樣罐子裝ISO粗灰,則重達4.5公斤。

 

美國亞利桑那試驗粉塵#IEC 60312試驗粉塵#ISO 12103試驗粉塵 4006306773;;60496773;,王,韓國ITC沙塵試驗箱

 

美國亞利桑那試驗粉塵#IEC 60312試驗粉塵#ISO 12103試驗粉塵 4006306773;;60496773;,王,韓國ITC沙塵試驗箱
更多內容正不斷收集整理中……美國亞利桑那試驗粉塵#IEC 60312試驗粉塵#ISO 12103試驗粉塵 4006306773;;60496773;,王,韓國ITC沙塵試驗箱